Date | Version | Status |
---|---|---|
3.0.19 | January 20th, 2020 | On Target |
3.1 | March 1st, 2020 | On Target |
In the online forums:
Example:
Subject: Add support for 3D Waterfall
Add support for routing of audio through a VAC / 2nd device as well as the primary device.
❌ DAB / DAB+ cannot be added due to licencing of the audio codecs.
Show a summary of enabled RX and TX DSP, for example equaliser, phase rotation etc.
Add button to disable / reset all RX DSP.
Add a DVB-S, DVB-S2 decoder.
Add more modes to the digital decoder.
make the Analyser a seperate program.
Add a window which shows a summary of all RX including the selected output device, mute status etc.
Display bands in the spectrum.
Add a digi-mode button. When selected all TX options such as nosise gate, phase rotation, equaliser are bypassed.
Add diversity support for 2 or more phase-coherent receivers.
Only show active stations (filter by day, time).
Add embedded HTML / browser windows which can show any HTML / web element.
Add more hotkey support - mode, tuning, ...
Add manual notch(es).
Add support for more memories, maybe unlimited?
Highlight the memory in use.
Enable offset tuning for SDRs with a spur, for example Lime.
Add a Reset button to fully reset an identity.
Add a scanner.
Add tuning support for the Shuttle.
Add support for μv and S-Units.
Option to turn off the signal meter in Spectrum or move it over the frequency in Receiver DSP.
Add PTT support using the TMate 2.
Add support for a full voice keyer.
Increase resolution in high zooms.
Add full 3D support for the spectrum and/or waterfall.
When recording and squelch is active start a new file for each recording if the audio is squelched for a configurable period.
A better, simpler scheduler design is desired.
Add support for both Audio and Data recording on/off via serial port (CAT) commands.
Add support for antenna flip around N / S / end stop.
Get the FT-991 working properly as an extrnal radio for transmit with the QO-100 where the receiver is an Airspy.
To support SDRs such as Pluto and Lime with LEO / MEO / HEO satellites add support for Dopller correction in the transmit path.