Low Speech Level Look in the Spectrum pane of the DSP panel and check the following:

  • Microphone selection
  • Microphone is On
  • If using a microphone connected to the host radio make sure ✶ Microphone on Radio ✶ is selected
  • If using a microphone connected to the host radio make sure Mic boost is selected and Line in is not selected in the hardware-specific configuration 


Default Passband Filter

To load the default passband filters:

  1. Click •••  to display the Transmit Options
  2. Select Common /  Passband
  3. Click Definitions to display Filter Definitions: Transmit
  4. Click Defaults, look at the new definitions, click OK.