What convention should I use if I am listening to a signal via SDr-Radio and want to post the frequency information to something like a DX Cluster ? I have been using simply the frequency read-out on SDR-Radio that corresponds with the placemnt of my filter/cursor over a signal. This is very accurate (when compared to the frequency read-out on my TS2000) BUT the signal in SDr-Radio is always the same frequency regardless of mode (LSB, USB, CW).
If you are hearing distorted audio with kit 1E make sure the Graphics Equaliser settings are not too high.
From the AF Output pane select Graphics Equaliser and turn down the levels.
Also try reducing the RF / IF gain.
Please do not send direct e-mail to to me - post in the support forums instead, thank-you.
This is the only way I can be sure I see all questions as I get about 200 e-mails a day and they can be lost in the anti-spam filtering.
You must join the forums to be able to post questions. To join simply press REGISTER at the top of this page.
Make sure you enter your e-mail address correctly. If you do not receive a confirmation e-mail then send a message to simon@hb9drv.ch please.
Related mailing lists: