So you want to listen to DRM using the console? Here's what you need:

1. The SDR-RADIO.com console and a RFspace radio or a SoftRock. You cannot receive DRM using a remote server (at the moment).
2. The Dream software.
3. A Virtual Audio Cable to connect the console to the DRM software.

Now follow these steps:

1. Install Dream.
2. Install VAC.
3. Start VAC and select Audio Repeater (see screenshot below for settings). The important step is to select a sample rate of 48,000Hz.
4. Start Dream, click on the Settings menu and make sure the Virtual Audio Cable is selected for input.
5. Start the console, select the Data: USB mode from the More... button and tune to a DRM transmission (see screenshot below). Set the filter width to be wide enough to capture the entire transmission, a DRM transmission is typically 10kHz wide.
6. Enjoy!

Virtual Audio Cable - Audio Repeater

Dream - Disco Palace on 6.015MHz

Dream - Voice of Russia

SDR-RADIO.com console receiving DRM.

A pre-compiled Dream DRM kit is available at http://www.df9cy.de/download.htm, the file you need is http://www.df9cy.de/download/setup-dream-1-12b.exe (or later).